Intel Vig390s - Manual (Page 71)

Vig390s Motherboard Manual V1.0 70
LBA/ Large Mode • Disabled
• Auto [Default]
Displays whether automatic translation mode is
enabled from the hard disk
(This item is read only unless Type is set to User)
Block [Multi-sector
Transfer] • Disabled
• Auto [Default] Displays whether automatic multiple sector data
transfers are enabled
(This item is read-only unless Type is set to User)
PIO Mode • Auto [Default]
• 0
• 1
• 2
• 3
• 4 Sets the PIO mode
(This item is read-only unless Type is set to User)
DMA Mode • Auto [Default]
• SWDMA0
• SWDMA1
• SWDMA2
• MWDMA0
• MWDMA0
• MWDMA1
• MWDMA2
• UDMA
0
• UDMA 1
• UDMA 2
• UDMA 3
• UDMA 4
• UDMA 5
Specifies the DMA mode for the drive
Auto = Auto-detected
SWDMAn = Single Word DMAn
SWDMAn = Multi Word DMAn
UDMAn = Ultra DMAn
(This item is read-only unless Type is set to User)
SMART
Monitoring • Auto [Default]
• Disabled
• Enabled Enables/disables S.M.A.R.T. (Self Monitoring Analysis
and Reporting Technologies)
(This Item is read-only unless Type is set to User)
32Bit Data
Transfer • Disabled
[Default]
• Enabled
Enables/disables 32Bit data transfer
(This Item is read-only unless Type is set to User)