Intel Vig390s User Manual
Page 63
Vig390s Motherboard Manual V1.0
62
The network can be selected as a boot device. This selection allows booting from a
network add-in card with a remote boot ROM installed
.
OEM Logo or Scan Area
A 4 KB flash-memory user area at memory is for displaying a custom OEM logo
during POST.
USB Support
The USB connectors allow any of several USB devices to be attached to the
computer. Typically, the device driver for USB devices is managed by the operating
system. However, because keyboard and mouse support may be needed in the
Setup program before the operating system boots, the BIOS supports USB
keyboards and mice.
BIOS Setup Access
Access to the Setup program can be restricted using passwords. User and
supervisor passwords can be set using the Security menu in Setup. The default is
no passwords enabled.