Power menu, This menu configures power management – Intel Vig390s User Manual
Page 89
Vig390s Motherboard Manual V1.0
88
Power Menu
This menu configures power management
Figure 47: Power Menu
A detailed description of each of the features is given in the following table.
Table 48: Power Menu
Feature Options
Description
System Mode
• S1 (POS) only
• S3 only [Default]
Configures standby power mode, S1 suspend or S3
suspend to RAM. Note: Windows 2000 Pro does not
support S1
Repost Video on
S3 Resume
• No [Default]
• Yes
Some VGA cards may require “Repost Video on S3
Resume” signal after suspend.
ACPI 2.0 Support • No [Default]
• Yes
Enables Advanced Configuration and Power
Interface (ACPI) 2.0 specifications.
ACPI APIC
Support
• Enabled [Default]
• Disabled
Enable or disable the Advanced Configuration and
Power
Interface (ACPI) support
APM
Configuration
None
Power management device configuration
Press <Enter> to view this Sub menu
Hardware Monitor None
Hardware monitor device configuration
Press <Enter> to view this Sub menu
System Mode
[S3 only]
Repost Video on S3 Resume
[NO]
ACPI 2.0 Support
[No]
ACPI APIC Support
[Enabled]
8
APM Configuration
8
Hardware Monitor
Select the ACPI state
used for System
Suspend.
←
Select Screen
↑↓ Select
Item
+- Change Field
Tab Select
Field
F1
General Help
F10
Save and Exit
ESC Exit
v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.
BIOS SETUP UTILITY
Main Advanced
Power
Boot Exit