IBM TotalStorage DS6000 Series - Manual (Page 197)

Chapter 9. The DS Storage Manager: Logical configuration 173
Figure 9-24 View of the Define properties panel, with the Nickname defined
Do not click Create new storage unit at the bottom of the screen shown in Figure 9-24. Click
Next
and Finish in the verification step.
9.3.2 Configuring the storage unit
To create the storage unit, expand the Manage Hardware section, click Storage units (2),
click Create from the Select action pull-down and click Go. Follow the panel directions with
each advancing window.
After clicking Go, you will see the General storage information panel as shown in Figure 9-25
on page 174.