IBM TotalStorage DS6000 Series - Manual (Page 198)

174 DS6000 Series: Concepts and Architecture
Figure 9-25 View of the General storage unit information panel
As illustrated in Figure 9-25, fill in the required fields as follows:
1. Click the Machine Type-Model from the pull-down list.
2. Fill in the Nickname.
3. Type in the Description.
4. Click the Select Storage Complex from the pull-down, and choose the storage complex
on which you wish to create the storage unit.
Clicking Next will advance you to the Specify DDM packs panel, as shown in Figure 9-26. Fill
in the proper information for your specific environment.
1
2
3
4