4 creating arrays from array sites – IBM TotalStorage DS6000 Series User Manual
Page 204
180
DS6000 Series: Concepts and Architecture
Figure 9-35 View of the Specify storage units parameters panel
Under the Specify storage units parameters, do the following:
1. Click the Select volume group for host attachment pull-down, and highlight Select
volume group later
.
2. Click any valid storage unit I/O ports under the This host attachment can login to field.
3. Click Apply assignment and OK.
4. Verify and click Finish.
9.3.4 Creating arrays from array sites
Under Configure Storage, click Arrays. The screen will advance to the Create Arrays:
Simulated panel (not shown here).
Click the Storage complex pull-down, and highlight the storage complex on which you wish
to configure, click Create and Go. The screen will advance to the Definition method panel
shown in Figure 9-36.