IBM TotalStorage DS6000 Series - Manual (Page 216)

192 DS6000 Series: Concepts and Architecture
9.3.13 Displaying the storage units WWNN in the DS Storage Manager GUI
Under Simulated manager, perform the following steps to display the WWNN of the storage
unit:
1. Click Simulated manager as shown in Figure 9-50.
Figure 9-50 View of the Real-time Manager panel
2. Click Storage units.
3. Select the check box beside the storage unit name, as shown in Figure 9-51.
Figure 9-51 View of the storage unit with the radio button and the Properties selected
4. Select Properties from the pull-down as shown in Figure 9-51.
5. Click Go. The panel will advance to the General panel shown in Figure 9-52.