IBM TotalStorage DS6000 Series User Manual
Page 371
Advertising
Appendix B. Using the DS6000 with iSeries
347
When you get to the point where you will select the volumes to be added, you will see a panel
similar to that shown in Figure B-27. Multipath volumes appear as DMPxxx. Highlight the
disks you want to add to the disk pool and click Add.
Figure B-27 Adding a multipath volume
The remaining steps are identical to those in “Adding volumes to an Independent Auxiliary
Storage Pool” on page 334.
Note:
For multipath volumes, only one path is shown. In order to see the additional paths,
see “Managing multipath volumes using iSeries Navigator” on page 349.
Advertising