IBM TOTAL STORAGE DS8000 - Manual (Page 221)

CMUN02232E SOURCE Unable to create logical subsystem: device type
mismatch
Explanation
The device type of the new logical subsystem is inconsistent with the device type of
existing logical subsystems in the address group.
Action
Specify consistent device types, and then resubmit the task. If the problem persists,
contact IBM technical support for assistance.
CMUN02233E SOURCE Logical volume operation failure: inconsistent
starting and ending logical volume numbers
Explanation
The starting logical volume and the ending logical volume must belong to the same
logical subsystem.
Action
Specify the same logical subsystem for the starting and ending logical volumes, and
then resubmit the task. If the problem persists, contact IBM technical support for
assistance.
CMUN02234E SOURCE Unable to create logical subsystem: device type
format error
Explanation
The device type length must be less than 4 characters.
Action
Specify a valid device type, and then resubmit the task. If the problem persists,
contact IBM technical support for assistance.
CMUN02235E SOURCE Unable to create or modify logical subsystem:
invalid format
Explanation
A logical subsystem identifier must be 2 hexadecimal characters.
Action
Specify a 2-hexadecimal character logical subsystem ID, and then resubmit the
task. If the problem persists, contact IBM technical support for assistance.
Chapter 7. DS storage management console server messages 201