IBM TOTAL STORAGE DS8000 - Manual (Page 55)

Action
Specify a pair of subsystem IDs, and then resubmit the command.
Tip: Enter
″help
command_name
″
for more information.
CMUC00100E COMMAND_INFO A pair of subsystem IDs VALUE_0 is
specified. A single subsystem ID is required for this command.
Explanation
The command requires a single subsystem ID as a parameter.
Action
Specify a single subsystem ID, and then resubmit the command.
Tip: Enter
″help
command_name
″
for more information.
CMUC00101E COMMAND_INFO FlashCopy pairs VALUE_0 are persistent.
The -wait option cannot be specified for persistent pairs.
Explanation
The FlashCopy pairs were established as persistent, with the intention of retaining
the relationship after the copy completes. This definition overrides the -wait option.
Action
Resubmit the command without the -wait option.
Tip: Enter ″help command_name ″ for more information.
CMUC00102E COMMAND_INFO The -cp option must be used in conjunction
with the -wait option.
Explanation
You must include a -cp flag and value when the -wait option is used with this
command.
Action
Resubmit the command, specifying both -cp and -wait flags and values, or omit the
-wait option.
Tip: Enter
″help
command_name
″
for more information.
Chapter 2. DS command-line interface messages 35