IBM TOTAL STORAGE DS8000 - Manual (Page 73)

CMUC00173I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID
successfully created. Use the lsremoteflash command to determine
copy completion.
Explanation
The remote FlashCopy relationship has been created and started successfully, but
this message is being returned before the copy completes. Use the lsremoteflash
command to determine if the copy has completed.
Action
None.
CMUC00174I COMMAND_INFO Remote FlashCopy pair PAIR_ID successfully
made revertible.
Explanation
The remote FlashCopy volume pair has been modified to revertible. The source
data can now be committed to the target, or the source data can be reverted to
the data image that is currently on the target.
Action
None.
CMUC00175I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID
successfully resynchronized. Use the lsremoteflash command to
determine copy completion.
Explanation
The remote FlashCopy relationship resynchronization operation started successfully,
but this message is being returned before the copy completes. Use the
lsremoteflash command to determine if the copy has completed.
Action
None.
CMUC00176I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID
successfully committed.
Explanation
The remote FlashCopy relationship has been committed. The target data is an
identical image of the source data at the time the commit command was issued.
Action
None.
Chapter 2. DS command-line interface messages 53