IBM TOTAL STORAGE DS8000 - Manual (Page 74)

CMUC00177I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID
successfully reverted.
Explanation
All new writes to the source volume since the last time data was committed to the
target volume are being discarded.
Action
None.
CMUC00178I COMMAND_INFO Remote FlashCopy volume pair PAIR_ID
successfully reversed.
Explanation
The original remote FlashCopy source volume has been made the target volume.
The original remote FlashCopy target volume has been made the source volume.
Any uncommitted incremental changes to the original source volume data are being
overwritten with older data from the new source volume.
Action
None.
CMUC00179I COMMAND_INFO Are you sure you want to remove the remote
FlashCopy pair PAIR_ID? [y/n]:
Explanation
You are being asked to confirm that you want to remove the remote FlashCopy pair
relationship.
Action
Enter Y to delete the remote FlashCopy volume pair relationship. Enter N to cancel
the operation.
CMUC00180I COMMAND_INFO Removal of the remote FlashCopy volume
pair PAIR_ID has been initiated successfully. Use the lsremoteflash
command to determine when the relationship is deleted.
Explanation
The deletion of the remote FlashCopy relationship has been started, but this
message is being returned before the process completes. You must use the
lsremoteflash command to determine if the removal has completed.
Action
None.
54 IBM TotalStorage DS8000: Messages Reference