IBM TOTAL STORAGE DS8000 - Manual (Page 75)

CMUC00181E COMMAND_INFO A user name must be specified.
Explanation
This command requires a user name. You can specify the user name with the -user
command-line flag or in the password file.
Action
Specify a valid user name, and then resubmit the command.
Tip: Enter
″help
command_name
″
for more information.
CMUC00182E COMMAND_INFO No management console IP address is
specified.
Explanation
No command can be issued until you have specified the IP address of the
management console. This IP address establishes communication between the
command-line interface client and the management console server.
Action
Specify a valid IP address for the management console, and then resubmit the
command. Specify the IP address in your user profile or by using appropriate
options on some commands.
Tip: Enter ″help command_name ″ for more information.
CMUC00183E COMMAND_INFO Invalid management console IP address:
VALUE_0.
Explanation
An invalid IP address for the management console is specified in the user profile or
with command flags.
Action
Specify a valid IP address for the management console, and then resubmit the
command. You can specify the IP address in your user profile or by using
appropriate options on some commands.
Tip: Enter ″help command_name ″ for more information.
CMUC00184E COMMAND_INFO Management console server connections
cannot be changed during an interactive or script session.
Explanation
The current CLI session is either in interactive mode or script mode, and the
command specifies a new management console server address. The command is
Chapter 2. DS command-line interface messages 55