IBM TOTAL STORAGE DS8000 - Manual (Page 53)

Action
Specify the subsystem ID in the proper format, and then resubmit the command.
Tip: Enter
″help
command_name
″
for more information.
CMUC00092E COMMAND_INFO The specified volume ID VALUE_0 already
exists.
Explanation
The specified volume exists.
Action
Use a volume ID not currently in use, and then resubmit the command.
CMUC00093E COMMAND_INFO The specified volume VALUE_0 is not type
CKD.
Explanation
The specified volume is a fixed block volume. The volume type must be
count-key-data for this operation.
Action
Specify a count-key-data volume, and then resubmit the command.
Tip: Enter
″help
command_name
″
for more information.
CMUC00094E COMMAND_INFO The specified volume VALUE_0 is not of
type FB.
Explanation
The specified volume is a count-key-data volume. The volume type must be fixed
block for this operation.
Action
Specify a fixed block volume, and then resubmit the command.
Tip: Enter
″help
command_name
″
for more information.
CMUC00095E COMMAND_INFO No storage image ID is specified.
Explanation
A storage image ID must be specified in your profile or by using the -dev flag with
the command.
Chapter 2. DS command-line interface messages 33