Setting, Network requirements, A pg. 30) – JVC VN-C215V4U User Manual

Page 30

Advertising
background image

30

Setting

● Ensure that there is sufficient network

bandwidth for the data volume to be sent out
by VN-C215V4U.

● Data volume to be sent by VN-C215V4U

varies with the settings and number of
distributions.

● The maximum bit rate from VN-C215V4U is

about 9 Mbps.

Estimation of total bit rate

The JPEG file size per frame varies with the
encoding settings as well as input video signals.
The following table may be used as a reference.
When VFS is selected, the quantization table
during JPEG encoding will be maintained and
the file size will increase/decrease according to
the input signals. When AFS is selected,
encoding will be performed such that the
average size of multiple JPEG images is the
target file size.

VN-C215V4U accepts requests from up to a
maximum of 5 clients. In addition, it also allows
transmission of 1 multicast stream. The total
frame rate refers to the sum of these frame rates.
For example, when 10 fps is requested by 2
clients, and in addition multicast is transmitted at
a rate of 10 fps, the total frame rate will be:

10 + 10 + 10 = 30 fps

If the JPEG file size per frame is 30 KB, then the
total bit rate will be:

30 KB x 30 fps = 900 KB/s = Approx. 7.2
Mbps

Insufficient network bandwidth

When there is insufficient bandwidth, the
number of JPEG frames (frame rate) that the
client can acquire will decrease.

Network Delay

When the client acquires JPEG via TCP, VN-
C215V4U will
send out data while checking the
ACK from the client at the same time. For
networks with considerable delay, data cannot
be sent out until ACK is received, and therefore
the frame rate will drop.
Drop of frame rate due to network delay can be
eliminated by sending data via multicast.

Network Jitter

When there is considerable network jitter, delay
time may be prolonged and the image frame rate
may drop.

Packet Loss

When acquiring images from VN-C215V4U via
TCP, packet loss may be recovered by
resending by TCP. When there is considerable
delay during resending, however, missing data
may occur and the image frame rate may drop.
When packet loss occurs during multicast
sending from VN-C215V4U, the image frame
rate may drop.

List of protocols and port numbers used
by VN-C215V4U

VN-C215V4U uses the protocols and port
numbers listed below. Ensure that these ports
are allowed through the firewall when a firewall
is to be installed.

Network Requirements

Picture Quality
Control Method

VGA File
Size

QVGA
File Size

VFS
(Variable
File Size)

1 (High)

80 KB

27 KB

2

60 KB

20 KB

3

40 KB

13 KB

4 (Medium)

30 KB

10 KB

5

25 KB

8 KB

6

20 KB

7 KB

7 (Low)

15 KB

5 KB

AFS
(Average File Size)

Selection
may be
made from
the range
between 10
and 100 KB

Selection
may be
made from
the range
between 3
and 33 KB

Protocol/Port No.

Purpose of Use

TCP/80

JPEG acquisition,
Web Settings page,
API

TCP/20, 21

FTP

TCP/25

Mail delivery

TCP/User Setting No.

Alarm sending

UDP/User Setting No.

Alarm sending

UDP/User Setting No.

Multicast sending

UDP /123

SNTP

VN-C215_EN.book Page 30 Monday, November 27, 2006 9:46 AM

Advertising