Troubleshooting (continued) – JVC VN-C215V4U User Manual

Page 82

Advertising
background image

82

Others

Troubleshooting (continued)

Symptom

Causes and Countermeasures

Reference

Page

Multicast images cannot be
played back

● Start multicast transmission manually from the

Streaming page of VN-C215V4U.

● In the case of multicast reception at the built-in

viewer, check that the multicast address and port
number of the built-in viewer settings coincide
with those on the Streaming page of VN-
C215V4U.
Make use of a network that supports IGMPv2 for
multicast transmission.

● Multicast may be blocked by the WindowsXP

firewall. When this occurs, perform the following
to allow it to pass through.

● Double-click on [Windows Firewall] in [Start]-

[Control Panel], click the [Add Por...] button
under the Exception tab, followed by
registering the port number in the port
number field, for which you want it to pass
through. Enter an arbitrary character string in
the name field.

A Pg. 56
A Pg. 76

The frame rate of the
displayed image is low

● Check the settings on the Encoding page of the

VN-C215V4U unit.

● Check the built-in viewer settings as well when a

built-in viewer is in use.

● Frame rate will be constrained when the network

bandwidth is narrow.

A Pg. 44
A Pg. 76

A white zone appears in the
built-in viewer.

● For some computers, a part of the Internet

Explorer graphics may not appear and is left
white. Perform following on the Internet Explorer.

● Right-click on the Desktop screen. If

[Properties]

-[Setup]-[Advanced]-

[General]

-[DPI Setting] is set to

ALarge sizeB

or

ACustom setting...B, select ANormal sizeB

to resume normal drawing.

^

Unable to receive alarm
notification at the computer
via TCP/UDP

● Data may be blocked by WindowsXP firewall.

When this occurs, perform the following to allow
it to pass through.

● Double-click on [Windows Firewall] in [Start]-

[Control Panel], click the [Add Por...] button
under the Exception tab, followed by
registering the port number in the port
number field, for which you want it to pass
through. Enter an arbitrary character string in
the name field.

^

VN-C215_EN.book Page 82 Monday, November 27, 2006 9:46 AM

Advertising