JVC VN-C215V4U - Manual (Page 33)

33
ⅷ Changing the IP address using the Internet Explorer
1.
Launch the Internet Explorer on the computer
2.
When proxy setting is enabled in the Internet Explorer, follow the steps below to disable the
proxy of the Internet Explorer
● Select in the order of [Tools]-[Internet Options...]-[Connections]-[LAN Setting], followed by
deselecting the check for [Use a proxy server for your LAN] in [Proxy Server] of the [Local Area
Network(LAN)Settings] window.
3.
If Active scripting of the Internet Explorer is not set to AEnableB, follow the steps below to
enable it
● Select [Trusted sites] under [Tools]-[Internet Options...]-[Security]. Upon doing so, the [Sites...]
button directly below becomes active. Click on this button and deselect the check for [Require
server verification(https:) for all sites in this zone] in the displayed window. Next, add VN-
C215V4U web site to the zone.
Example: http://192.168.0.2
● Next, select [Trusted sites] under [Tools]-[Internet Options...]-[Security], and press the [Custom
Level] button. Select [Enable] under [Scripting] -[Active scripting] of the [Security Settings]
window that has been opened.
Deselect the check
Select [Enable]
VN-C215_EN.book Page 33 Monday, November 27, 2006 9:46 AM