John Deere OMPFP10808 - Manual (Page 2)

Introduction
OUO6050,0000FB1 ­19­10AUG10­1/1
JS56696,0000218 ­19­10DEC08­1/1
JS56696,000039F ­19­23SEP09­1/1
www.StellarSupport.com
NOTE: Product functionality may not be fully represented in this document due to product changes occurring after the time of printing. Read the
latest Operator’s Manual and Quick Reference Guide prior to operation. To obtain a copy, see your dealer or visit www.StellarSupport.com
Foreword
WELCOME to the GreenStar™ system offered by John
Deere.
READ THIS MANUAL carefully to learn how to operate
and service your system correctly. Failure to do so could
result in personal injury or equipment damage. This
manual and safety signs on your machine may also be
available in other languages. (See your John Deere
dealer to order.)
THIS MANUAL SHOULD BE CONSIDERED a permanent
part of your system and should remain with the system
when you sell it.
MEASUREMENTS in this manual are given in both
metric and customary U.S. unit equivalents. Use only
correct replacement parts and fasteners. Metric and inch
fasteners may require a specific metric or inch wrench.
RIGHT­HAND AND LEFT­HAND sides are determined by
facing in the direction of forward travel.
RECORD PRODUCT IDENTIFICATION NUMBERS
(P.I.N.). Accurately record all the numbers to help in
tracing the components should they be stolen. Your dealer
also needs these numbers when you order parts. File the
identification numbers in a secure place off the machine.
WARRANTY is provided as part of John Deere’s support
program for customers who operate and maintain their
equipment as described in this manual. The warranty is
explained on the warranty certificate which you should
have received from your dealer.
This warranty provides you the assurance that John
Deere will back its products where defects appear within
the warranty period. In some circumstances, John Deere
also provides field improvements, often without charge
to the customer, even if the product is out of warranty.
Should the equipment be abused, or modified to change
its performance beyond the original factory specifications,
the warranty will become void and field improvements
may be denied.
GreenStar is a trademark of Deere & Company
Read The Guidance Manual
Before attempting to operate Parallel Tracking or
AutoTrac™, fully read the Guidance manual to understand
components and procedures required for safe and proper
operation.
The Guidance manual is for both Parallel Tracking and
AutoTrac guidance systems applications.
AutoTrac is a trademark of Deere & Company
102110
PN=2