John Deere OMPFP10808 - Manual (Page 20)

Setup
CZ76372,00001CF ­19­12OCT10­2/2
PC1
1
178
—UN—14JUL08
Implement Tab
A—Machine Tab
B—Implement 1 Tab
C—Implement 2 Tab D—Implement Type Drop­Down
Menu
E—Implement Model Drop­Down
Menu
F— Implement Name Drop­Down
Menu
G—Change Offsets Button
H—GPS Offsets Button
I— Change Widths Buttons
Press Implement 1 tab to get to the implement setup page.
NOTE: All offsets including GPS offsets on the implement
will be stored to the implement name.
The name will also be the base for transferring
data to the desktop software.
For the implement setup, the following information is
required to be populated:
• Implement Type (D)
• Implement Name (F)
15­7 102110
PN=20