John Deere OMPFP10808 - Manual (Page 37)

Integrating iGuide and iTEC Pro
CZ76372,00001E0 ­19­12OCT10­1/1
Operation
PC1
1845
—UN—23MAR09
GreenStar—Guidance
A—View Tab
B—Guidance Setting Tab
C—Shift Track Settings Tab
D—iTEC Pro Tab E—Path Accuracy Indicator
F— Shift Track Left Button
G—Shift Track Center Button
H—Shift Track Right Button I— Steer Sensitivity Input­Box
J— Set Track 0 Button
K—iGuide Status Pie
L— Steer On/Off button M—iTEC Pro Status Pie
N—iTEC Pro Enable Button
O—iTEC Pro Icon
1. Tracking Mode—The operation of iGuide and iTEC
Pro will be available only on straight tracking mode.
2. End of Turn Performance
a. When both systems are activated, the operator will
see two paths on the screen.
b. The solid white line is the implement path and
current guidance path.
c. The dashed white line is the projected vehicle path
and is shown as a reference for the operator.
d. If iTEC Pro detects a collision with an impassable
boundary, both solid and dashed line paths will turn
red until the collision is passed.
25­2 102110
PN=37