JVC VN-C215VP4U - Manual (Page 16)

16
Setup
The connection and setup procedures are
described as below.
K
K
K
Procedures
ⅷ Make sure you touch the metal surface of
the [MONITOR] terminal to release the
static electricity from your body. Static
electricity may cause the camera to
malfunction.
ⅷ Make sure that various parts of the camera
do not drop on the floor when mounting the
base to the ceiling or connecting the cable
of the camera unit.
ⅷ When mounting the heater (sold separately
: KA-ZH215), read the instruction manual of
the heater carefully before mounting.
step 1
Setup ( A Pg. 16)
Mount the camera and configure
image settings.
step 2
Network Settings
(
A Pg. 32)
Configure the network settings of
the computer and this camera.
step 3
Internet Explorer Settings
T For details, please refer to the
[INSTRUCTIONS](pdf) in the
supplied CD-ROM.
step 4
Operation of Built-in Viewer
(
A Pg. 39)
Monitoring and still image saving
operations are possible using the
built-in viewer.
VN-C215VP_EN.book Page 16 Wednesday, December 20, 2006 4:26 PM