JVC VN-C215VP4U - Manual (Page 21)

21
Mount the base to an electrical box.
1.
Remove the camera unit from the base
(
A Pg. 17)
2.
Mount the base to the electrical box
Use two mounting holes and two M4 screws to
mount the base to the electrical box.
Memo：
● M4 screws are not supplied.
3.
The following procedures are the same as
normal mounting
● Cable connection (A Pg. 18)
● Mounting the camera to the base
( A Pg. 19)
● Image adjustment (A Pg. 28)
● Mounting the inner dome (A Pg. 30)
● Mounting the dome cover (A Pg. 30)
Mounting the camera via
electrical box
4 inch square electrical box
M4 screw (not supplied)
VN-C215VP_EN.book Page 21 Wednesday, December 20, 2006 4:26 PM