JVC VN-C215VP4U - Manual (Page 34)

34
Setting
ⅷ IP Address setting at the computer
Set the computer to an IP address that enables communication with VN-C215VP4U.
1.
Click [Start]
● Select in the order of [Control Panel]-[Network Connection]-[Local Area].
2.
The computer with which Internet Explorer is launched automatically selects the connected
network
● Right-click and select [Properties].
● Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check
boxes are selected.
3.
Select [Internet Protocol(TCP/IP)] and click [Properties].
4.
Set the IP address
5.
Click [OK] on the [Local Area Connection Properties] screen
IP Address Settings
(continued)
A
B
C
D
E
Click [OK].
Set [Subnet Mask] to a value that is
appropriate for the setting operation. Clarify
with the network administrator if you have
any queries.
(Use 255.255.255.0 when the camera is in
its default settings)
Select [Use the following IP adress].
When a [Default Gateway] is present, make
use of the IP address (e.g., 192.168.0.254).
Set the [IP Address]. (For example, use
192.168.0.100 when VN-C215VP4U is in its
default settings)
Memo：
● Make sure that you take note of the
original IP address before altering.
Note：
● When setting, ensure that a duplicate IP
address is not used within the same
network environment.
VN-C215VP_EN.book Page 34 Wednesday, December 20, 2006 4:26 PM