Setting, Network requirements, A pg. 32) – JVC VN-C215VP4U User Manual

Page 32

Advertising
background image

32

Setting

● Ensure that there is sufficient network

bandwidth for the data volume to be sent out
by VN-C215VP4U.

● Data volume to be sent by VN-C215VP4U varies

with the settings and number of distributions.

● The maximum bit rate from VN-C215VP4U is

about 9 Mbps.

Estimation of total bit rate

The JPEG file size per frame varies with the encoding
settings as well as input video signals. The following
table may be used as a reference. When VFS is
selected, the quantization table during JPEG
encoding will be maintained and the file size will
increase/decrease according to the input signals.
When AFS is selected, encoding will be performed
such that the average size of multiple JPEG images is
the target file size.

VN-C215VP4U accepts requests from up to a
maximum of 5 clients. In addition, it also allows
transmission of 1 multicast stream. The total frame
rate refers to the sum of these frame rates.
For example, when 10 fps is requested by 2
clients, and in addition multicast is transmitted at
a rate of 10 fps, the total frame rate will be:

10 + 10 + 10 = 30 fps

If the JPEG file size per frame is 30 KB, then the
total bit rate will be:

30 KB x 30 fps = 900 KB/s = Approx. 7.2 Mbps

Insufficient network bandwidth

When there is insufficient bandwidth, the number
of JPEG frames (frame rate) that the client can
acquire will decrease.

Network Delay

When the client acquires JPEG via TCP, VN-
C215VP4U wi
ll send out data while checking the
ACK from the client at the same time. For
networks with considerable delay, data cannot be
sent out until ACK is received, and therefore the
frame rate will drop.
Drop of frame rate due to network delay can be
eliminated by sending data via multicast.

Network Jitter

When there is considerable network jitter, delay time
may be prolonged and the image frame rate may drop.

Packet Loss

When acquiring images from VN-C215VP4U via
TCP, packet loss may be recovered by resending
by TCP. When there is considerable delay during
resending, however, missing data may occur and
the image frame rate may drop.
When packet loss occurs during multicast
sending from VN-C215VP4U, the image frame
rate may drop.

List of protocols and port numbers used
by VN-C215VP4U

VN-C215VP4U uses the protocols and port
numbers listed below. Ensure that these ports are
allowed through the firewall when a firewall is to be
installed.

Network Requirements

Picture Quality
Control Method

VGA File
Size

QVGA File
Size

VFS
(Variable
File Size)

1 (High)

80 KB

27 KB

2

60 KB

20 KB

3

40 KB

13 KB

4
(Medium)

30 KB

10 KB

5

25 KB

8 KB

6

20 KB

7 KB

7 (Low)

15 KB

5 KB

AFS
(Average File Size)

Selection
may be
made from
the range
between 10
and 100 KB

Selection
may be
made from
the range
between 3
and 33 KB

Protocol/Port No.

Purpose of Use

TCP/80

JPEG acquisition, Web
Settings page, API

TCP/20, 21

FTP

TCP/25

Mail delivery

TCP/User Setting No.

Alarm sending

UDP/User Setting No.

Alarm sending

UDP/User Setting No.

Multicast sending

UDP /123

SNTP

VN-C215VP_EN.book Page 32 Wednesday, December 20, 2006 4:26 PM

Advertising