JVC VN-C215VP4U - Manual (Page 37)

37
6.
The top page of VN-C215VP4U appears
7.
The Basic page with the IP address settings appears
A confirmation screen appears. Press the [OK] button. The VN-C215VP4U restarts using the new IP
address. It takes about 1 minute for the camera to reboot.
Memo：
● Access from this computer may fail when the IP address of VN-C215VP4U is changed. To enable
access to VN-C215VP4U from the same computer, alter the IP address at the computer accordingly.
Click on [Network], followed by [Basic]
on the next submenu.
B
A
C
Enter the values you wish to specify in
[IP Address], [Subnet Mask] and
[Default Gateway].
Click [OK].
Set the [IP Setting] item to [DHCP
Disable].
VN-C215VP_EN.book Page 37 Wednesday, December 20, 2006 4:26 PM