Jacuzzi J - 470 - Manual (Page 64)

Page 58
J-400 Series
4. With “Set Min.” highlighted
(Figure L), press the Left (decrease)
or Right (increase) button on the
Quad keypad to scroll through the
selection. Once the correct minutes
are displayed, press the Splash
button to save your changes. Press
button D to return to the Settings 1
Main Menu.
12.6 locking and unlocking the Topside
1. From the “Date and Time” Menu
(Figure M), press button C to access
the Lock feature. This feature
accepts a three digit code to lock
and unlock the panel from
unauthorized use.
2. To set each “lock code” digit, use the Left or Right button on the
Quad keypad. To change a number, press the Up or Down button to
scroll through selection 0-9 (Figure N). Once you have selected a
3-digit code, press the Splash button to save your changes. When
the spa is locked the LCD display will look like Figure O.
3. To Unlock the topside panel, press
the Splash button on the Quad
keypad. The lock icon will appear on
the LCD display (Figure P). Press
the Up, Down, Left and Right Quad
keypad buttons to enter “lock code”
from left to right. After all three lock
code digits are entered, press the
Splash button to access the Main Menu (if correct code
was entered).
note: In case the lock/unlock code is lost or forgotten, a default code of
772 can be used to unlock the panel.
5
4
3
TIME
Select
Clock
Hour
Minutes
Press to save
02 Set Min.
Figure L
Figure M
Press to enter
5
4
3
DATE & TIME
Select
Date Settings
Time Settings Time Settings
98
F
5:25 PM
Press to
enter lock code
Press to save
2
4
8
LOCK
2 4 8
Figure O Figure N
Figure P
Press to unlock
2
4
8
LOCK