6 j-1000 audio system ipod operation, J-400 series, Page 86 – Jacuzzi J - 470 User Manual

Page 92

Advertising
background image

Page 86

J-400 Series

If ONE COPY is selected: The record

percent “DOWN LOAD xx%” will display

on the LCD (17). After copying is

finished, the next track will automatically

begin playback.

If ALL COPY is selected: “The number

of total track --> the number of recorded

track” will display on LCD (17). After

copying is finished, the unit will beep

for about 3 seconds, then automatically
begin playback of track #1.

note: In copying process, you can change
to other modes. (USB and NAND modes
could not be selected.) While in other modes, the screen will default to
the downloading process after 3 seconds.

3. Deleting music Files from nanD (internal memory)

In NAND mode, press and hold SEL button (15) for about 2 seconds
until “ONE DEL” displays on LCD (17). Use VOL up or down button
(3) to choose ONE or ALL. Press ENT button (9) to confirm selection.
If ONE DEL is selected: Next track will begin playback after file

deletion has finished.
If ALL COPY is selected: “DELETING” will display on LCD, then “NO

FILE” will display after deletion process has finished. After that it
would automatically switch to Radio mode.

4. searching File or Folder in usb/nanD

To Search File In USB or NAND mode: Press AS/PS button (6) once

to enter track searching mode, then press VOL up or down button (3)
to scroll through available tracks. At desired track, press ENT button
(9) to confirm selection. Once track is selected, it will automatically
begin to play.
To Search Folder in USB or NAND mode: Press AS/PS button (6) to

enter folder searching mode. Then press VOL up/down button (3) to
scroll through available folders. At desired folder, press ENT button
(9) to confirm selection. Then search your desired file as above
method.

19.6 J-1000 audio system iPod Operation

1. Play iPod

Open front panel (16) and plug a iPod into the iPod Docking Station

(12) as shown. Refer to step 12 (page 83) for details. The iPod will

begin to play automatically. Close front panel. The “iPod” symbol will

display to indicate an iPod is connected.

To Play connected iPod: Press MODE button (4) to change to iPod

mode. The iPod will play. The display will either show:

1

2

17

3

9

8

7

5

4

6

10

11

13

15

12

16

14

18

Advertising
This manual is related to the following products: