Jacuzzi J - 470 - Manual (Page 97)

Page 91
J-400 Series
19.11 J-1000 wireless remote
A. The J-1000 remote
Your spa is equipped with a technologically
advance wireless remote (Figure A). Most spa
functions can be controlled with the remote. The
sleek modern design and easy navigation make
this remote a great addition to your spa enjoy-
ment. Listed below are the remote features, how
to access and control them. General feature of
the remote are:
When not in used or after any 15 seconds •
of inactivity the remote goes into a “Sleep”
status until activated. The backlighting and
display will turn off.
When activated the remote checks and •
verifies that it and the control system are
bonded.
When activated the remote checks to see •
if any of the components are running. If so,
the component icon will blink on the remote LCD display to
alert you that those components are activated. The water
temperature is displayed on top of the screen, while the main menu
is displayed.
Pressing any key will activate the remote; the backlight will turn on •
and illuminate the keys and display. This lighting has a 10 second
time-out period if no keys are pressed.
note: Remote unit is water resistant not waterproof, therefore the unit
should never be left in the spa while the cover is on and spa is not in use.
= lock icon: Will only appear if the spa is in locked mode and
needs to be unlocked via the spa not the remote.
= Temperature icon: Allows you to set and control the
temperature.
= Time icon: Allows you to set and control the time, either in a
12-hour or 24-hour period.
1
= lights 1 icon: Allows you to control the interior lights.
1
= show 1 icon: Allows you to control the interior Light Rotation
mode.
2
= lights 2 icon: Feature not available.
1
1
U S B
AUX
1
2
iPod
2 2
Figure A