Jacuzzi J - 470 - Manual (Page 62)

Page 56
J-400 Series
12.3 setting the Check Filter
reminder
1. Use the Navigational Quad Keypad
to scroll from Language to Filter by
using the Down button. After “Filter”
selection is active, press the Splash
button to access the “set filter timer”
(Figure C).
2. Press the Left or Right button on the
Quad Keypad to scroll the number
of days you would like the reminder
to appear so the filters and polishing
bag can be cleaned or replaced
(Figure D).
3. Press the Splash button to confirm
and save your selection.
4. When the set time period expires, the “Please check filter!” message
will appear on the Main Menu display (page 76). The reminder must
be reset when the time allotted expires.
note: The time range is from 10 to 365 days in increments of 10 days or
you can elect to turn the feature “OFF”.
12.4 setting the Date
1. Press button C (Figure A, page 55)
to enter the date and time menu.
2. The “Date Setting” is already
highlighted once you enter the
screen (Figure E). Press the Splash
button on the Navigational Quad
Keypad to go to the submenus.
3. The screen will open with the “Set
Year” highlighted (Figure F). Press
the Left or Right button on the Quad
keypad to scroll through selection.
Once the correct year is displayed,
press the Down button on the Quad
keypad to enable the month selection.
Figure C
Press to
set filter timer
Language
Ozone
Filter
100 Days
ENG
5 4 3
SETTINGS 1
Figure D
Press to
save filter timer
Language
Ozone
Filter
100 Days
ENG
5 4 3
SETTINGS 1
Press to enter
5
4
3
DATE & TIME
Select
Date Settings
Time Settings Date Settings
Figure E
5
4
3
TIME
Select
Year
Month
Day
Press to Save
Set Year 2009
Figure F