Japan Tiger 7100e+ - Manual (Page 143)

User Manual 143
English
Items
Printer type
TAB size
Page width
(letters in a line)
Page length
(lines in a page)
Banner output
Printer Trap
Trap enable
Trap type
Trap address(UDP)
Trap address(IPX)
Status
Ready
Offline
Printer Error
Function
Set Printer type for KANJI filter.
Designate the character width to convert a tab code
(0x09) into a half space (0x20), when outputting data via
KANJI filter. If the width is set to 0, the tab transformation
will not be conducted. The value may vary from 0 to 16.
Set the page width when outputting via KANJI filter. The
value may vary from 0 to 255.
Set the page length when outputting via KANJI filter. The
value may vary from 0 to 255.
Select whether a banner page is output when printing with
LPR or FTP. This setting is valid only for TCP/IP protocol.
Set whether Printer Trap is used.
Set the Local Trap and Global Trap.
Set the Trap Notice Address for UDP. Enter it in a
decimal system as "###.###.###.###". When IP Address
is 0.0.0.0, the trap will not be issued.
Enter the Trap Notice Address for IPX. Enter it as
"Network Address (8 digits)+ Node Address (12 digits)".
When it is 00000000:000000000000, the trap will not be
issued.
Printer is on-line and ready to receive print data.
Printer is off-line.
Some printer error is caused. "Warming up" means
Printer is getting ready for printing. Please wait for a
moment.
Setup Value
Fixed as PS(PostScript).
Default value
8
Default value
78
Default value
66
YES : With Banner page
NO : Without Banner page
ENABLE : To use this function.
DISABLE : Not to use this
function.
LOCAL
UDP
IPX
Default value
0.0.0.0
Default value
00000000:
000000000000
Note
Please confirm the message
on Printer LCD.
7100e+.p65 25/08/99, 20:55 PM 143