Japan Tiger 7100e+ - Manual (Page 96)

Fast Ethernet 7100e+ 96
Generating Print Queue
1 From the [Available Options], select [Print Queue
Information] and press the Enter key.
2 Press the Ins key. Enter the new print queue name to be
generated (“Q8C” in this example), then press the Enter key.
New Print Queue Name: Q8C
The print queue “Q8C” is generated.
Generating Printer Server
If you use an existing print server, the following settings are not
required. Proceed to “Generate Printer controlled by Print server”.
1 From the [Available Options], select [Printer Server
Information] and press the Enter key.
2 Press the Ins key to enter a new print server name to be
generated (“8C-PSERVER” in this example), and press the
Enter key.
New Print Server Name: 8C-PSERVER
The print server name “8C-PSERVER” is registered.
Generating Printer controlled by Print Server
1 From the [Available Options], select [Printer Server
Information] and press the enter key.
2 Select the print server you generated (“8C-PSERVER”), then
press the enter key.
3 Select [Print Server Configuration] and press the Enter key.
4 Select [Printer Configuration], then press the Enter key.
5 Select a printer number to which no printer is installed, and
press the Enter key. In this example [Not Installed 0] is
selected.
Configured Printers
Not Installed 0
Not Installed 1
Not Installed 2
Not Installed 3
Not Installed 4
Not Installed 5
7100e+.p65 25/08/99, 20:51 PM 96