English – Japan Tiger 7100e+ User Manual
Page 55
User Manual
55
English
4
Log in the Fast EtherNet using TELNET.
Example: Logging in the Fast EtherNet in the case that the
IP address is “192.168.20.127”
telnet 192.168.20.127
Trying 192.168.20.127
Connected to 192.168.20.127
Escape character is ^].
Fast EtherNet 7100e+ Ver 1.0.2. TELNET server.
Copyright 1999 (c) Oki Data Corporation
Copyright 1999 (c) Japan Computer Industry
Inc.
login: root
root user needs password to login.
password: <CR>
User root logged in.
No. Message
Value
(level .1)
1 : Setup TCP/IP
2 : Setup SNMP
3 : Setup NetWare
4 : Setup EtherTalk
5 : Setup NetBEUI
6 : Setup printer port
7 : Display Status
8 : Setup printer trap
96 : Reset to factory set
97 : Reboot
98 : Quit setup
99 : Exit setup
Please select (1-99)?
5.
Type in “1” and press the Enter key. Carry out the following
settings.
Please select (1-99)?
_1
No. Message
Value
1:TCP/IP protocol
: ENABLE
2:IP address
: 192.168.20.127
3:Subnet Mask
: 255.255.255.0
4:Gateway address
: 192.168.20.254
5:RARP protocol
: DISABLE
6:DHCP/BOOTP protocol : DIDABLE
7:root password
:
99:Back to prior menu
Please select (1-99)?
6.
Logout from the Fast EtherNet.
In order to enable new settings, turn the printer OFF/ON.
If the printer is not turned OFF/ON, the Fast EtherNet
will continue to use the previous values. Please make
sure to turn the printer OFF/ON.
7100e+.p65
25/08/99, 20:50 PM
55