English – Japan Tiger 7100e+ User Manual
Page 69
User Manual
69
English
3.
Configure the transfer mode.
There are two types of transfer mode, the “BINARY
mode” in which the file contents is output as it is and
the “ASCII mode” which converts the LF code to the
CR+LF code. If a binary file, converted by the printer
driver, is transferred, the transfer mode has to be the
“BINARY mode”.
Example: Changing the transfer mode to the BINARY mode
and verifying the current mode.
ftp> type binary
200 Type set to I.
ftp> type
Using binary mode to transfer files.
ftp>
4.
Using the put command, transfer the print data to the Fast
EtherNet.
There are two modes of file transfer using the put command.
Example: Transferring the print data “test.prn”.
ftp> put test.prn
Example: Transferring the print data specified by an absolute
path “/users/tes/test.prn”.
ftp> put /users/test/test.prn /lp
If the print data is specified by an absolute path,
specify the transfer logical directory. There is no
need to switch directories with the cd command.
5.
Log out from the Fast EtherNet using the quit command.
ftp> quit
7100e+.p65
25/08/99, 20:50 PM
69