Japan Tiger 7100e+ - Manual (Page 85)

User Manual 85
English
Configuring the Fast EtherNet
This section explains how to use the Standard Setup Utility for
Windows. You can also make these changes using the Setup
Utility on a Macintosh or via TELNET. Read the following
description and choose the appropriate utility for your
network environment.
• Use the utility when the NetWare file server and the
print server are running normally.
• Ensure that the printer is switched on as the Fast
EtherNet cannot be configured when the printer is off.
This procedure assumes that the Standard Setup Utility has
already been installed. For information on installing the utility,
see “CHAPTER 7 Control of Fast EtherNet”.
1 Select the Fast EtherNet to be configured from the list.
The Ethernet address is displayed on the Fast EtherNet
self-diagnostics test. If there are many NetWare file servers,
there may be cases where the list is not displayed. In that
case, select [Environment Settings] in the [Options] menu
and click the [NetWare] tab. Select [Specify network to be
searched], enter the NetWare address where the Fast
EtherNet exists, then click [Add]. If you click [Search for
OKI Devices] in the [File] menu on the main screen, only
the NetWare addresses you have specified will be searched.
7100e+.p65 25/08/99, 20:51 PM 85