Japan Tiger 7100e+ - Manual (Page 93)

User Manual 93
English
2 Select [OKI Device Settings] in the [Setup] menu.
3 Click [NetWare] tab.
4 Enter the following items on the NetWare setup screen.
5 Click [Remote Printer Details] on NetWare setting screen,
enter the following items, then click [OK].
Input the print server name (8CPSERVER in this example). This
must match the “Print server name” you created earlier
Enter the network type you use (802.3 in this example).
Select “Print Server” (RPRINTER).
Input “Printer Name” (P1 in this example). This must match the
“Printer Name “ you created on earlier.
Enter the “Print Server Name” controlling the printer (8C-PSERVER).
This must match the “Print Server Name” you generated earlier.
Enter the timeout setting for the release of the printer port. This
should normally be 10 seconds (default).
6 When all the settings are finished, click [Setup] on the
NetWare setup screen.
7100e+.p65 25/08/99, 20:51 PM 93