Sharp AR-M205 - Manual (Page 11)

9
BEFORE USING THE MACHINE
1
Parallel port
Connect to your computer to use the printer
function. (Software Setup Guide)
USB 2.0 port (when the dual function board is
installed)
Connect to your computer to use the printer and
scanner functions. (Software Setup Guide)
Document feeder tray (when the SPF/RSPF is
installed)
Place the original(s) that you wish to scan face up
here. Holds up to 40 originals.
Original guides (when the SPF/RSPF is
installed)
Adjust to the size of the originals.
Feeding roller cover (when the SPF/RSPF is
installed)
Open to remove misfed originals. (p.63)
Right side cover (when the SPF/RSPF is
installed)
Open to remove misfed originals. (p.63)
Exit area (when the SPF/RSPF is installed)
Originals exit the machine here after
copying/scanning.
Reversing tray (when the RSPF is installed)
Pull out to remove misfed originals. (p.64)
Toner cartridge lock release lever
To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.
Toner cartridge
Contains toner. (p.70)
Roller rotating knob
Turn to remove misfed paper. (p.65, p.66)
Fusing unit release levers
To remove a paper misfeed in the fusing unit, push
down on these levers and remove the paper.
(p.66)
Photoconductive drum
Copy images are formed on the photoconductive
drum.
Fusing unit paper guide
Open to remove misfed paper.
20 18
24
25
22 23 21
26 27
19
29 28
16
17
18
19
20
21
22
23
24
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
The model name can be seen to the machines
front cover.
25
26
27
Warning
28
29
Note