Sharp AR-M205 - Manual (Page 44)

42
5
Chapter 5
USER SETTINGS
This chapter explains how to set the automatic exposure level, toner save mode, and the user programs, which are
custom settings that control fine points of the machine’s operation.
ADJUSTING THE AUTOMATIC
EXPOSURE LEVEL
The exposure level used in automatic exposure adjustment, which automatically adjusts the copy exposure
according to the original, can be adjusted. If copies tend to be too dark or too light when automatic exposure
adjustment is used, follow the steps below to adjust the automatic exposure level.
The automatic exposure level can be adjusted separately for the document glass and the SPF/RSPF.
1 To adjust the automatic exposure
level in the SPF/RSPF, place the
original in the SPF/RSPF. (p.19)
Make sure that the SPF/RSPF indicator is lit.
2 Press the [AUTO/TEXT/PHOTO] key to
select "PHOTO".
3 Hold down the [AUTO/TEXT/PHOTO]
key until the AUTO indicator blinks.
The exposure level
indicators show the
current setting.
4 Press the [Light] key ( ) or [Dark]
key ( ) to lighten or darken the
automatic exposure level as desired.
5
Press the [AUTO/TEXT/PHOTO] key to
complete the setting.
The AUTO indicator stops blinking and lights
steadily.
The copy, scanner and printer functions cannot be used while the automatic exposure level is being adjusted.
Note
To adjust the automatic exposure level for
copies made from originals placed on the
document glass, proceed to step 2.
Note
AUTO
TEXT
PHOTO
1 3 5
After adjusting the automatic exposure level,
it is recommended that you make a test copy
to check the new level.
1 3 5
Note