Sharp AR-M205 - Manual (Page 13)

11
BEFORE USING THE MACHINE
1
POWER SAVE indicator
Lights up when the machine is in a power save mode.
(p.12)
Display
Shows the set number of copies, as well as the copy
ratio, user program function or setting code, or an
error code when an error occurs.
When the [SCAN] key is pressed to enter scanner
mode, the display shows the port used (U_1 for USB
1.1 or U_2 for USB 2.0). When Button Manager
software is used, the display shows a program
number. (p.22, p.40, p.47)
Copy ratio display key ( )
Hold down when the machine is not in use to
display the copy ratio in the display. (p.24)
ZOOM indicator
Lights up when a zoom ratio is set. (p.24)
Zoom keys ( , )
Use to select any reduction or enlargement copy ratio
from 25% to 400% in increments of 1%. (p.24)
INTERRUPT key ( ) /indicator
Interrupts a copy run. (p.31)
Light and Dark keys ( , ) /indicators
Use to adjust the TEXT or PHOTO exposure level.
(p.21)
ORIGINAL SIZE ENTER key/ORIGINAL SIZE
indicators
Use to enter the original size. (p.16) The selected
original size will light up.
PAPER SIZE indicators
Light up to show the selected copy paper size. (p.16)
PAPER SIZE ENTER key
Use to set the paper size in the paper trays. (p.16)
SPR/RSPF indicator (when the SPF/RSPF is
installed)
Lights up when originals are set in the document
feeder tray. (p.19)
TRAY SELECT key ( )
Use to manually select a paper tray. (p.21)
AUTO IMAGE key/indicator
Press for automatic copy ratio selection. (p.22)
Paper feed location/misfeed location indicators
The selected paper feed location is shown by a lit
indicator (
). (p.21)
The general location of misfed paper is shown by a
blinking red indicator (
). (p.63)
PRESET RATIO selector keys ( , )
/indicators
Use to select preset reduction/enlargement copy
ratios. (p.23)
[ ] key
Use to check the total number of pages scanned.
(p.71)
Numeric keys
Use to select the desired copy quantity or to make
user program entries. (p.22)
To display the total number of pages output by the
machine, hold the [0] key down. (p.71)
READ-END key ( )
Use to check the total number of copies made (p.71).
To begin printing copies after the original has been
scanned for two-sided copying or other copy jobs that
use the document glass. (p.28, p.33, p.34)
START key ( ) /indicator
Press to make a copy (p.18). Also press to exit
"Auto power shut-off" mode and to set a user
program. Copying is possible when the indicator is
on.
CLEAR ALL key ( )
Clears all selected settings and returns the
machine to the initial settings. (p.12)
CLEAR key ( )
Clears the copy quantity display or terminates a
copy run.
ORIGINAL DATA
SORT
AUDIT CLEAR AUTO PAPER SELECT POWER SAVE INTERRUPT
CLEAR
CLEAR ALL
START
ZOOM
READ-END
PRESET RATIO
AUTO
IMAGE
TRAY
SELECT
ORIGINAL SIZE
ENTER
AUTO
ORIGINAL
SIZE PAPER
SIZE
TEXT
PHOTO
1 3 5
11 X 17
200%
100%
50%
141
95
77
64
129
121
8½ X 14
8½ X 11
8½ X 11
8½ X 5½
EXTRA
25 400%
2 IN 1
4 IN 1
GROUP
EDGE
ERASE
MARGIN
SHIFT
CENTER
9 10 11 12 7 8 13 14 15 16 17 18 19 20 21
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36