Sharp AR-M205 - Manual (Page 66)

64
TROUBLESHOOTING
Section C
Remove the misfed original from the exit area.
If the misfed original cannot be easily removed
from the exit area, open the moveable part of the
document feeder tray and remove the original.
If an RSPF is installed, remove the reversing
tray and then remove the original.
2 Open and close the SPF/RSPF to
make the misfeed location indicator
stop blinking.
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.
3
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key (
).
Copying will resume from the originals that still
remained when the misfeed occurred.
MISFEED IN THE BYPASS TRAY
1
Gently pull the misfed paper out.
2
Open and close the side cover.
The misfeed indicator
(
) will go out.
After removing a misfed original from the
exit area, be sure to attach the reversing
tray securely to the exit area (when the
RSPF is installed).
Note
• When closing the side cover, press down
on the handle.
• If the misfeed indicator ( ) does not stop
blinking, check for torn pieces of paper in
the machine.
Note