Sony RM-AV3000T - Manual (Page 18)

18
Example: To play a DVD player
1
Press the corresponding
Component Select button or the
Label key for the component you
have set up.
To display and change the Label keys,
press the Mode Display key
repeatedly.
The Commander comes on and the
keys for operating the selected
component are displayed.
Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 12).
To change the Label keys, press the
Mode Display key (in this case, DVD)
repeatedly. Each time you press the
DVD key, the display of the Label
keys changes as follows.
2
Press the desired key in the
touch-key display.
When the remote control signal is
sent,
is displayed on the display.
If necessary, you can also use buttons
on the Commander, such as the
2
+/– buttons, the % button or the
PROGRAM +/– buttons, other than
LCD touch-keys.
See “Table of Preset Functions” (page
88) for the functions of keys and
buttons for each component.
3
When you are done using the
Commander, press
COMMANDER OFF to turn the
Commander off.
MENU EXIT
COMMANDER
OFF
MORE 3 2 1
TV STB VCR DVD CD AMP OTHER
TIMER
SYSTEM CONTROL
OK
1
3
2
PROGRAM
DVD
DVD
COMMANDER
OFF