Sony RM-AV3000T - Manual (Page 19)

19
Using Non-Preset
Remote Control
Operations
— Learning Function
To operate non-preset components or
functions, use the following “learning”
procedure to “teach” any of the
programmable buttons and keys to
operate the functions of another remote
control. You can also use the learning
function to change the signal of
individual keys and buttons after setting
the component code number (page 12).
To “teach” to the Component Select
buttons or Label keys, see page 45.
To “teach” to the SYSTEM CONTROL
buttons or Label keys, see page 49.
Note
Some specific remote control signals may not
be learned.
Continued
MENU EXIT
COMMANDER
OFF
MORE 3 2 1
TV STB VCR DVD CD AMP OTHER
TIMER
SYSTEM CONTROL
OK
3
4
5
2
8
PROGRAM
Note
The remote control signals may be different for
some components or functions. In this case,
programme the remote control signals with the
learning function (see page 19). Note, however,
that components and functions that do not
support the remote control of infrared signals
will not work with this Commander.
To control the volume
Press the 2 +/– buttons to control the
volume, and the % button to mute.
When you select a visual component, the
TV’s volume will be controlled, and
when you select an audio component, the
amplifier’s volume will be controlled.
You can change this setting also (page
29).
Notes
• If you have programmed any signal for the
2 or % button for any component using the
learning function (page 19), that signal will
be transmitted instead of controlling the
volume of the TV or amplifier once you select
that component.
• If you have programmed any signal for the
2 +/– buttons or the % button of TV or
AMP using the learning function, that signal
will be also transmitted when you select
another component. However, if you have
programmed any signal for the 2 +/–
buttons or the % button of another
component, that signal will be transmitted
only after you select that component.
• If you have assigned another component to
the TV or AMP button, the volume of the TV
or amplifier cannot be controlled even when
you select other components.