Sony RM-AV3000T - Manual (Page 41)

41
8
Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
To display and change the Label keys
for timer programme numbers
Press the TIMER button repeatedly. For
timer settings, see page 61.
When you select the Component name,
go to Step 6.
When you select the system number or
the timer programme number, go to Step
7.
6
Press the INTERVAL key.
The current interval setting stays lit,
and (+) and (–) flash.
7
Press the (+) or (–) key to change
the interval. You can control the
interval from 100 to 900ms in
units of 50ms.
Each time you the (+) key is pressed,
the interval increases by 50 ms.
Each time you the (–) key is pressed,
the interval decreased by 50 ms.
(ms: 1/1000 second)
COMMANDER
OFF
Continued