Sony RM-AV3000T - Manual (Page 88)

88
KEY DISPLAY
POWER1
1 – 9, 0, 1-,-/--,
2-
INPUT
DISPLAY
SLEEP
MAIN/SUB
TELETEXT
TV ON
WIDE
EPG
SHIFT
MENU
OK
PIP ON/OFF
TV
FUNCTION
To turn on and off
To change the programme
Also to turn on
To select double-digit
numbers
Works in same way as the
TV’s commander
To select a number between
20 and 29
To change the input mode
To display the current
programme on TV
To operate SLEEP function on
the TV(Works only for a TV
with SLEEP function)
To switch the sound of the
duplex broadcast
To switch to teletext
To turn on
To return from teletext to TV
To switch to WIDE
To turn on/off the
programme guide
To toggle between Key
functions
To call up the MENU display
To move the cursor upward
To move the cursor
downward
To move the cursor to the
right
To move the cursor to the left.
To enter the selection of the
MENU display
Turn on/off the ‘window’
picture
Appendices
Table of Preset
Functions
Note
There may be some components or functions
that cannot be operated with this Commander.
KEY DISPLAY
PIP CH+/–
PIP SWAP
PROGRAM +/–
2 +/–
%
RED, GREEN,
YELLOW,
BLUE
PIP TEXT
PIP MOVE
PIP STILL
PIP OFF
ZOOM
ZOOM+
CENTER
ZOOM–
FUNCTION
To change the TV programme
in the ‘window’ picture
To swap the ‘main’ picture
and the ‘window’ picture
Programme up : +
Programme down : –
To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of
the TV’s manufacturer
Volume up : +
Volume down : –
To mute the volume on the TV
Press again to turn muting off
Fastext buttons
To switch to teletext in the
‘window’ picture
To move the location of the
‘window’ picture
Freeze the ‘window’ picture.
Turn off the ‘window’
picture.
To zoom a picture
To scroll upward a picture
enlarged by the zoom
function
To centre the picture enlarged
by the zoom function
To scroll downward a picture
enlarged by the zoom
function
Using Fastext
With Fastext you can access pages with one key
stroke.
When a Fastext pages with is broadcast, a
colour-coded menu will appear at the bottom
of the screen.
The colours of this menu correspond to the red,
green, yellow, and blue keys on the Remote
Commander.
Press the key which corresponds to the colour-
coded menu.
The page will be displayed after some seconds.