Sony RM-AV3000T - Manual (Page 35)

35 Continued
To clear programmed commands
for a specific SYSTEM CONTROL
button or corresponding Label key
1
While pressing COMMANDER
OFF, press %.
“SET” appears on the Mode Display
key.
2
Press the Mode Display key (SET)
once to display “RESET” on one
of the Label keys on the display.
3
Press the RESET key.
“RESET” appears on the Mode
Display key.
4
Press the SYSTEM key.
System numbers appear on the Label
keys.
To change Label keys, press the
MORE button repeatedly until you
obtain the desired system number.
Each time you press the MORE
button, the display of the Label keys
changes as in Step 3 on page 32.
5
Press the SYSTEM CONTROL
button (1, 2 or 3) or the Label key
(SYSTEM4 - SYSTEM15) of which
programmed commands you
want to erase.
The selected system number is
displayed on the left Label key.
6
Press the YES key.
COMMANDER
OFF
RESET
YES
SYSTEM