Sony RM-AV3000T - Manual (Page 76)

76
Adjusting the Backlight of the
Display Window (continued)
COMMANDER
OFF
7
Press the BRIGHT or DIM key to
select the brightness. Then press
COMMANDER OFF to decide the
brightness.
The display returns to Step 3.
BRIGHT: bright
DIM:
dark
8
Press the ON MODE key.
The commander enter the setting
mode to select the buttons to lighten
the display window. The current
setting (LIGHT or ALL) stays lit. The
other flashes.
9
Press the LIGHT or ALL key to
select the buttons on the
Commander to light the display
window.
If you press COMMANDER OFF, the
display returns to Step 3.
LIGHT: The Display Window is lit by
pressing the LIGHT button
only.
ALL: The Display Window is lit by
pressing any button on the
Commander except the 2 +/–,
%
, PROGRAM +/–, and
COMMANDER OFF.
Note
If you use the Commander frequently with
the “ALL” position, the battery life may be
short. In this case, shorten the Automatic-
Off time (page 73, 74).
10
Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previously set mode.