Sony 3-270-589-12 (1) - Manual (Page 40)

40
Superimposed Text Information
Chap
te
r 2
Pr
epa
ra
tio
n
s
7
Press the ,/OUT button.
The third level of the menu appears.
8
Press the M/MARK1 or m/MARK2 button to select
“TIME DATA ONLY”.
9
Press the SET button.
The setting is confirmed.
10
Turn the display of character information on.
For details, see “To turn superimposed text on and
off” (page 40).
As shown below, you can display 24-frame timecode
at the same time as 30-frame pulldown timecode.
Superimposed Text
Information
The HDSDI signals output from the HDSDI OUTPUT 1
and 2 connectors and the MONITOR connector, the
SDSDI signals output from the SDSDI OUTPUT
connector, and the composite signals output from the
COMPOSITE OUTPUT connector can contain
superimposed text information, including timecode, menu
settings, and alarm messages.
To turn superimposed text on and off
Set the CHAR SEL item on page P1 of the function menu.
ON: Display superimposed text.
OFF: Do not display superimposed text.
LCD: Display superimposed text on the LCD panel of this
unit, but do not display it on an external video monitor
connected to this unit.
To turn superimposed text on and off for selected
outputs
When CHAR SEL is set to “ON”, the settings of the setup
menu items DISPLAY CONTROL >HD CHARA and
DISPLAY CONTROL >SD CHARA (see page 97)
determine whether superimposed text is output to the
various output connectors.
Adjusting the text display
You can use the items in the DISPLAY CONTROL setup
menu to specify the position, size, and type of
superimposed characters.
See page 95 for more information about the items in the
DISPLAY CONTROL menu.
SETUP MENU
:T&STA
DISPLAY CONTROL
DISPLAY INFO
* TIME DATA & STATUS
TIME DATA & UB
TIME DATA & CNT
TIME DATA & TIME
TIME DATA & CLIP
TIME DATA ONLY
L T C 0 0 : 5 9 : 5 9 : 2 3
P D T 0 0 : 5 9 . 5 9 : 2 8
Output connector Text output modes selected by
DISPLAY CONTROL >HD CHARA
settings
HDSDI2 ALL OFF
HDSDI OUTPUT 1 Off On Off
HDSDI OUTPUT 2 On On Off
MONITOR Off On Off
Output connector Text output modes selected by
DISPLAY CONTROL >SD CHARA
settings
SDI COMPOSITE ALL OFF
SDSDI OUTPUT On Off On Off
COMPOSITE
OUTPUT Off On On Off