Sony 3-270-589-12 (1) - Manual (Page 58)

58
Playback
Ch
apt
er 3 Rec
o
rdi
ng and
P
la
y
bac
k
To cue up with sub clip thumbnail images
With the desired clip list loaded in the current clip list,
proceed as follows.
1
Press the SUB CLIP button and the THUMBNAIL
button, turning them on.
Thumbnails of the first frames in the sub clips appear.
a) When a title has been assigned to a clip list, the title is enclosed in double
quotation marks, for example “SAKURA”.
To return to the previous screen
Press the THUMBNAIL button, turning it off.
2
Select the thumbnail whose clip you want to cue up
(you can do this with the same operations as step 1 of
“To select a thumbnail image and start playback” (see
page 54)).
3
Press the SET button or the PLAY button.
If you press the SET button, a still image appears
showing the first frame of the selected sub clip.
If you press the PLAY button, playback starts from the
first frame of the selected sub clip.
In clip lists, the first frame of the sub clip (the In point
frame) is always displayed as the thumbnail.
Repeat Playback
You can perform repeat playback for normal and clip list
playback.
To perform repeat playback, set OPERATIONAL
FUNCTION >REPEAT MODE in the setup menu to
“ON” (a REPEAT indicator appears in the display), and
then proceed as follows.
1
Insert a disc.
To perform repeat playback for normal playback,
proceed to step 3.
2
To perform repeat playback for clip list playback, load
a clip list into the current clip list and then press the
SUB CLIP button.
3
Press the PLAY button.
Playback starts from the saved playback position.
Normal playback: When playback of the last clip
finishes, it resumes from the start of the disc,
repeatedly playing from the first through the last
clip on the disc.
Clip list playback: When playback of the last sub clip
finishes, it resumes from the start of the clip list,
repeatedly playing from the first through the last
sub clip in the clip list.
Repeat playback begins the unit is powered on if it is
powered on with a disc loaded and OPERATIONAL
FUNCTION >REPEAT MODE in the setup menu set to
“ON”. Clip list playback starts from the first sub clip in the
clip list.
To start repeat playback from the device
connected to the REMOTE (9P) connector
Set OPERATIONAL FUNCTION >REPEAT MODE in
the setup menu to “ON”, and then send the command to
start repeat playback from the external device.
For details of commands, refer to the REMOTE (9-pin)
Protocol Manual for the PDW series (not supplied).
To stop repeat playback
Do one of the following.
• Set OPERATIONAL FUNCTION >REPEAT MODE in
the setup menu to “OFF”.
• Operate any of the playback buttons except the PLAY
button, or operate the jog or shuttle dial.
• From the external device connected to the REMOTE
(9P) connector on this unit, send a command other than
the repeat playback start command to this unit.
The unit enters search mode when you conduct a search,
and stop mode at the end of the disc.
Note
Name of current clip list a)
Sub clip information (date and
time of creation, initial timecode,
playback time)
Currently selected sub clip
Recording date and time
of clip list Total playback time of sub
clips in the clip list
Sixth frame is selected from
a total of 34 sub clips
Note