Sony 3-270-589-12 (1) - Manual (Page 42)

42
Superimposed Text Information
Chap
te
r 2
Pr
epa
ra
tio
n
s
Displaying Supplementary Status
Information
When you set the setup menu item DISPLAY CONTROL
>SUB STATUS to other than “OFF” (see page 96), you
can view supplementary status information on the monitor
screen below the operating mode display area.
The following items of supplementary status information
are displayed depending on the setting of the menu item
SUB STATUS.
The following tables show the on-screen indications of
supplementary information and their meaning.
When the menu item SUB STATUS is set to “TC
MODE”:
When the menu item SUB STATUS is set to
“REMAIN”:
PLAY LOCK Playback mode (servo
locked)
REC Record mode (servo
unlocked)
REC LOCK Record mode (servo locked)
JOG STILL A still picture in jog mode
JOG FWD Jog mode in forward
direction
JOG REV Jog mode in reverse
direction
SHUTTLE STILL A still picture in shuttle mode
SHUTTLE (Speed) Shuttle mode
VAR (Speed) Variable speed mode
TOP 0001/xxxx Cuing up to the first frame of
the first clip.
END xxxx/xxxx Cuing up to the last frame of
the last clip.
PREROLL Cuing up during preroll
C.REC Clip Continuous Rec mode
(servo unlocked)
C.REC LOCK Clip Continuous Rec mode
(servo locked)
C.REC-PAUSE Clip Continuous Rec mode
(recording is being stopped)
Setting of menu item
SUB STATUS Items of supplementary
information displayed
TC MODE Operating mode of the internal
timecode generator
REMAIN Remaining free capacity of the
disc in minutes, and the number of
new clips that can be recorded on
the disc.
Display Operation mode
Block A Block B
T C R
P L A Y
0 0 : 0 4 4 7 . 0 7
L O C K
.
I N V A 1 3 4 2 T C S
Supplementary status information
CLIP NO Clip number
PLAYBACK REMAIN Time from the current playback
position to the recording end
position, displayed in time data
format.
On-screen
indication Meaning
INT PRST FREE The internal timecode generator is
operating in FREE RUN mode.
INT PRST REC The internal timecode generator is
operating in REC RUN mode.
INT REGEN-T&U The internal timecode generator is in
synchronization with the playback
timecode (LTC) read from disc.
EXT LTC-T&U The internal timecode generator is in
synchronization with the external
timecode (LTC) input to the unit and is
generating the same timecode values
and user bit values as those of the
external timecode (regeneration).
EXT VITC-T&U The internal timecode generator is in
synchronization with VITC present in
the external video signal input to the
unit and is generating the same
timecode values and user bit values as
those of the external timecode
(regeneration).
EXT DVIN-T&U The internal timecode generator is in
synchronization with the external
timecode input to the unit via the
S400 connector and is generating the
same timecode values and user bit
values as those of the external
timecode (regeneration).
EXT DVIN.V-T&U The internal timecode generator is in
synchronization with the external VITC
input to the unit via the S400
connector interface and is generating
the same timecode values and user bit
values as those of the external
timecode (regeneration).
On-screen
indication Meaning
REMAIN 120m
298c (these
numbers are
examples of the
indication) Remaining free capacity of the disc in
minutes, and the number of new clips
that can be recorded on the disc.
When the time and number have not
been detected, “REMAIN ---m ---c”
appears.
Setting of menu item
SUB STATUS Items of supplementary
information displayed