Sherwood R-963 - Manual (Page 20)

ENGLISH
20
To mute the sound.
11
When 96 kHz PCM(2 channel stereo) signals are
input or the source direct function is selected, the
cinema EQ function can not be selected.
“CINEMA-EQ ON” will scroll on the display.
Press it again to cancel, then “CINEMA-EQ OFF”
will scroll on the display.
“MUTE” lights up.
To resume the previous sound level, press the
button again.
To compensate for edgy or shrill movie
sound tracks.
10
To listen with the headphones.
12
Ensure that the SPEAKER A/B button is set to the
off mode.
When listening to DTS, Dolby Digital or MPEG
program sources, if the headphones are plugged in
and the SPEAKER A/B button is set to the off
mode, the 2-CH downmix mode will be selected
automatically.(For details, refer to “Downmixing
into 2 front channels” on page 27.)
PHONES
To achieve the pure sound quality.
9
Only when playing program sources recorded in
analog stereo or digital 2 ch PCM format, the source
direct function can be selected.
“DIRECT” lights up and stereo mode is
automatically selected. Then the sound that bypasses
the tone circuitry will be heard.
Press the button again to cancel the source direct
function.
When you select the 7.1 CH DIRECT as input
source or the digital signals from DTS, Dolby Digital
or MPEG sources, etc. are input, the source direct
function is automatically canceled.
SOURCE
DIRECT
POWER
OFF
OSD
or
CINEMA EQ
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET
VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
MUTE