When selecting the tone control english – Sherwood R-963 User Manual
Page 43
43
T O N E D E F E A T
:
Off
T O N E C O N T R O L
R E T U R N : B a c k , : S e l e c t
B A S S
- - - - - + - - - - -
0 dB
T R E B L E
- - - - - + - - - - -
0 dB
OFF
OSD
POWER
MAIN
PAGE
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2
M3
AUTO
DSP
RNC-500
Press the CURSOR UP(
)/DOWN(
) buttons to select the TONE CONTROL, then press the ENTER
button.
1
When selecting the TONE CONTROL
ENGLISH
Note:
When the source direct function is activated, the TONE CONTROL cannot be selected.
Each time these buttons are pressed, the tone defeat mode
changes as follows:
On : Select this when listening to a program source without
the tone effect.
Off : Select this when adjusting tone for your taste .
Note :
When the tone defeat mode is set to On, the tone (bass and
treble) cannot be adjusted.
Press the CURSOR LEFT(
)/RIGHT(
) buttons to select the desired tone defeat mode.
2
When the tone defeat mode is set to Off to adjust the tone (bass and treble)
1. Press the CURSOR UP(
)/DOWN(
) buttons to select the desired tone mode.
Each time these buttons are pressed, “
” is moved to the tone defeat mode or the corresponding tone mode.
2. At the desired tone mode, press the CURSOR LEFT(
)/RIGHT(
) buttons to adjust the selected tone as desired.
The tone level can be adjusted within the range of -10~+10 dB.
In general, we recommend the bass and treble to be adjusted to 0 dB(flat level).
Extreme settings at high volume may damage your speakers.
3. To complete tone adjustment, repeat the above steps 1 and 2.
OFF
OSD
POWER
MAIN
PAGE
FAV
MUTE
CH/
SET
VOL
RETURN
DISC
DISP
MI
ROOM 2
1
STEREO
7.1
SURR
CH
2
3
4
5
6
7
8
9
0
ENT
M2
M3
AUTO
DSP
RNC-500